Asrock Challenger RX 7700 XT Custom Gpu Shroud
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Custom Shroud for the Asrock Challenger RX 7700 XT that supports 120mm fans.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
A Custom Shroud for the Asrock Challenger RX 7700 XT that supports two 120mm fans. It uses the same screws that came with the original shroud to mount it.
A 4 pin pwm to min 4 pin pwm adapter is Required!!!
PLA is not recommended due to it's low temperature tolerence, PETG or higher temperature resistant plastics are recommended. I made mine out of PETG and it works as intended.
The Gpu Shroud 6.stl file is for printers over 250mm bed size. The Gpu Shroud 6 Slice 1 and Gpu Shroud 6 Slice 2 is for smaller 3d printers with 180mm bed size. The Gpu Shroud 4 b1.blend is for editing the model in blender if you want / need to.
The fan screws thread themselves into the shroud and can be tricky.