WallArt - Cats Love

🐈❤ Cat Couple Wall Art

Bring a warm, romantic and peaceful atmosphere to your wall with this beautiful Cat Couple Wall Art. 🖤✨

This design features two cats sitting closely together, with their long tails beautifully intertwined below them. The simple but emotional composition represents love, connection, companionship and togetherness, making it a wonderful decoration for cat lovers and cozy homes. 🐈🐈❤

The elegant silhouette works especially well in bedrooms and intimate living spaces, where the design adds a soft and meaningful decorative touch.

It looks great in:

• 🛏 Bedrooms

• 🛋 Living rooms

• 🐈 Cat lover homes

• ❤ Romantic interiors

• 🌿 Cozy decor setups

• 📚 Reading corners

• 🏡 Modern homes

• 🎁 Gifts for couples

• 🎁 Gifts for cat lovers

• ✨ Warm and relaxing interiors

Printed in matte black PLA, the design creates a beautiful contrast and gives the model a clean, elegant and premium wall art look. 🖤✨

✨ Features

• 🐈 Two beautiful cat silhouettes

• ❤ Romantic couple design

• 🪢 Elegant intertwined tails

• 🖤 Clean and minimalist wall art style

• 🪶 Lightweight decoration

• 🖨 Easy FDM print

• 🚫 No supports required

• 📏 Fully scalable

• 🏡 Perfect for bedrooms and cozy interiors

• 🎁 Beautiful gift idea for cat lovers and couples

• ✨ Looks especially beautiful in matte black PLA

📏 Model Thickness: Approximately 3 mm

📐 Scaling

The model can be scaled directly in your slicer.

Because the design includes several thin areas around the tails, whiskers and outer outline, I recommend printing it larger rather than smaller for the best visual result.

The larger the print, the cleaner and stronger these delicate details will appear. 🐈✨

🖨 Recommended Print Settings

Printer: FDM / FFF
Material: PLA recommended
Nozzle: 0.4 mm
Layer Height: 0.28 mm
Walls / Perimeters: 2
Infill: 15%
Infill Pattern: Rectilinear
Supports: No
Brim: Usually not required
Raft: No
Print Orientation: Flat on the build plate
Cooling: 100% after the first layers
Wall Generator: Arachne recommended

Outer Wall: Up to 250 mm/s on capable printers
Inner Wall: 200–300 mm/s
Infill: 250–300 mm/s
Top Surface: 150–200 mm/s
First Layer: 30–50 mm/s

💡 Print Tip: For a beautiful front surface, print the visible side face down on a textured PEI plate. This gives the wall art a clean texture and a premium finish.

🛠 Mounting

I recommend mounting the wall art with double sided tape.

Since the model is lightweight, a few small pieces behind the thicker areas are usually enough for a secure hold.

🖤 My recommendation: Print it in matte black PLA and place it above a bed, sofa or cozy reading corner. Warm ambient lighting around the model makes the intertwined tails and romantic silhouette stand out beautifully. 🐈❤✨