Suzuki Alto Works RSR Intake Pipe for HKS pod filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For C chassis. Designed to move HKS pod filter next to the turbo. Will only fit if you remove the A/C compressor.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
For C chassis Alto Works RSR/RSX. Designed to relocate the HKS pod filter next to the turbo. Will only fit if you remove the A/C compressor.
Photos are shown printed in aluminum, but would also likely work well in PA6-CF or similar high-temperature tolerant materials.
35mm and 63mm reinforced silicone couplers and band clamps are used to fasten to the turbo and pod filter.
There is an optional mounting bracket on the rear-right side intended to attach to an intermediary bracket between a hard point on the engine and the intake pipe. This is not included in the design and intended to be fabricated by the end user. Something like a 1/2” x 1/8” (12mm x 3mm) strip of aluminum bent to shape would work well.
File is available on Onshape called "C-Chassis Air Filter Coupler V2"
