Steam Machine Traveling Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Since the Steam Machine is small and kinda 'portable' I wanted a somewhat rugged Case for my Steam Machine.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print without support, I printed it with 15 Perimeter to make it as Solid as possible.
Hardware you'll need:
6x 30mm M3 Screws
In the Bottom of the box is space for the Power cable and a thin HDMI cable
You have to either Lasercut or manually cut 5mm or 3\16" be mindfull what is Laser safe. DO NOT LASERCUT IF YOU ARE NOT SURE. Do not Lasercut Neopren!!!
I used closed cell polyethylene foam https://www.modulor.de/en/polyethylene-soft-foam-anthracite.html
One Sheet 1000x650mm is enough
Box lining Cutlist:
Each 2x - Side 1, Side 2, Lid 2, Lid 3, Bottom
Each 1x - Bottom 1, Lid 1
4x Bottom2