DIY Art | Chambre 007 | Instax SQ Frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
32 x 27 x 6 cm Instax SQ frame by Tokyo-based artist V-XL
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Open Community License v1.1
The Open Chambre series is a collection of 3D-printable wall sculptures released as open-source art by Tokyo-based artist V-XL (Baptiste Tavernier).
Explore the Full Archive!
More projects are available on the official terminal: https://v-xl.art
Artist: V-XL
Format: 32 x 27 x 6 cm ; Optimized for FDM 3D printing.
Printer: Parts were kept small on purpose, so they should fit on a Mini if you don't have a regular size printer.
***********************
🛠 PRINTING PROTOCOLS
Aesthetics: Optimized for any material. Standard Color Scheme: black frame with high-vis blue and red accents.
Hardware: All V-XL modules utilize M3 x 8mm screws and M3 square nuts (5.5 x 5.5 x 2.6mm) for fastening.
Specs: 0.4mm nozzle recommended. Use a brim or helper disk to ensure structural integrity and prevent warping when printing the base.
This module is divided into several files.
—First, print the 4 "Base" files (Standard Color Scheme: black). They do not need supports, but a brim or helper disks can help stabilize the base onto the printer’s plate.
— Fasten the Base modules with M3 x 8mm screws and M3 square nuts (5.5 x 5.5 x 2.6mm), front side and back side.
— Print the Top Grid File.
— Then print the Diamond (x6) and all the Inlay files (S.C.S.: blue or red). You will need to print Diamond inlay 6 times ; glue all the inlays into the Base
— Add 4 sM3 quare nuts in the main circle to fasten the top grid.
— Choose the Instax square picture you want to display, cover it with the top grid, and fasten the top grid with M3 x 8mm screws.
————— © V-XL // Baptiste Tavernier