1 / 4
Nissan Prairie M10 CA18S Weber 32/36 Carburetor Adapter Plate — image 1
1 / 4

Nissan Prairie M10 CA18S Weber 32/36 Carburetor Adapter Plate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Designed to adapt a Weber 32/36 onto the stock manifold of a Nissan CA18S engine, specifically the one on an M10 Prairie

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
22
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Public Domain

This is an adapter block designed to allow the use of a Weber 32/36 on a Nissan Prairie M10 fitted with the CA18S engine. I'm not sure whether this will work with the CA20 or E15 model variants as I have only tested it on my own prairie. It's designed to be printed in PA6-CF with 100% infill - be wary of the bottom warping. I have had it on the car for 9 months now with no vacuum leaks or melting problems (including on multiple hour motorway journeys).

The small holes at the front are designed to be tapped for an M6 bolt, the countersunk holes are for M8 Countersunk Hex Head bolt to bolt the adapter to the manifold, and the rear holes are designed as pass throughs so you can bolt into the stock rear holes on the manifold all the way through the Weber carb. I'm retaining the OEM carb riser for extra heat protection. 

Tags