FrameDeck
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.76 – €4.60 net (excluding VAT)
For file: Framework_12_Mainboard_Case_0.4n_0.2mm_PLA_COREONE_2h25m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.18 excluding VAT (range midpoint).
- Weight reported by the author
- 89 g
- Print time reported by the author
- 2.42 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A case for the framework 12 motherboard, featuring an alphanumeric display and a 4 key macropad.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
⚠ Disclaimer: Work in Progress
This model is currently untested. Clearances and fits are based on official component dimensions but have not yet been verified with a physical print.
The model features an acrylic window through which the spinning fan of the mainboard is visible, as well as an alphanumeric display and a macro keypad that can be customized by flashing the QT Py microcontroller with custom firmware e.g. for displaying messages, temperature, media control (play, pause, skip), ...
BOM
1x USB-C cable for powerdelivery (right angle) - routed out the back
1x USB-C cable for QT Py (right angle) - routed inside the case
1x Framework Laptop 12 Mainboard
1x Clear Acrylic Sheet (110 x 80 x 2mm)
1x Adafruit QT Py (PID 4900)
1x Adafruit NeoKey 1x4 (PID 4980)
4x MX/Kailh-compatible mechanical switches
1x Adafruit 4-Digit 7-Segment Display (PID 1911)
2x StemmaQT Cables (10-20cm)
4x M3x8mm Button-head screws
Double-sided electronics tape (VHB)
2x Expansion Cards
The QT Py microcontroller has to be taped to the bottom shell using the double-sided electronics tape, as cables with different length and stiffness will require different placement.