Octo-Pumpkin Skull

Marriage of my Skull V2, Very Flexi Snake, a pumpkin and an octopus

Printable in single color or two colors (in parts or multicolor)

The same as my Snake it is very flexible (much more than a typical models of this kind)
Each tentacle is made of 14 short segments

If you want to help me in making more such stuff you can can leave me a tip
https://paypal.me/kicic47

If you want to sell prints of this model you can buy a Commercial License for life (starting with a low price and getting highier after each license sold)
https://cults3d.com/en/3d-model/game/octo-pumpkin-skull-commercial-license

Short video:
https://www.instagram.com/reel/DdjQkDStMdi/

Made in Blender 3D without the use of any AI

3D printing settings

2-3 walls
No supports needed (unless resized up)
No infill needed when printed with 1 color
For parts or multicolor print use 5-10% rectangular
Printed with 0.2mm layer height

Good bed adhesion is needed. Brim is not recommended as you may need some time to remove it
Good cooling is recommended (connectors are with bridges)

Break possible connections between segments after print
With a clean print it will be moving like it should streight from the bed plate

Resizing down is not recommended unless you will use a smaller nozzle than 0.4mm

For printing as big as you want use original files
For printing in original size as much models as you can (usually 3) use Rectangular models

PARTS
Print a test file first - if it's too loose or to hard to assemble use 'XY compensation' for green parts or just use sand paper / glue
Green-End may be difficult to assemble (they are small), use pliers

MULTICOLOR
Select OctoPumpkinSkull and OctoPumpkinSkull_MULTI_Green files and drop them in slicer
Choose YES when asked to merge them or do it manually
Then select different color for Green part

MULTI models are with a flat 'frame' to keep everything in the right place - it will not be printed
Ignore 'errors'