1 / 5
Promethium Line · 14 Field Defences on One Print Bed · 28–32 mm Grimdark Wargaming Terrain — image 1
1 / 5

Promethium Line · 14 Field Defences on One Print Bed · 28–32 mm Grimdark Wargaming Terrain

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

14 one-piece barricades on a single 220 × 220 mm bed: sandbags, barrels, concrete, crates. No glue, no supports.

Rating
0 / 5
Likes
4
Downloads
24
Makes
0
Views
83
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

### The last line of defence

J-01 to J-14 are the defenders' field defences around the Promethium Line: fourteen one-piece covers on a single 220 × 220 mm print bed. Sandbag walls, a kinked blast shield, barrel barricades, concrete barriers, crates, a pipe section, an armour plate and gas cylinders. Print the bed once and you have cover spread across a whole table.

### Features

- 14 pieces, 2″ to 6″ long, 26 to 38 mm deep, 26.8 to 34.8 mm tall, 376.17 cm² footprint in total
- One piece each: no glue, no magnets, no fits
- Three angled pieces with bases that follow the mitred outline: J-02 with a 15° kink, J-04 as a 30° V, J-07 as a 90° corner
- Sand bases feather out flat to 0.4 mm on all edges, raised IDs J-01 to J-14
- One loose rules card for all fourteen

The fourteen field defences (length · footprint · height):

- J-01 Sandbag wall · 6″ · 152.4 × 28 mm · 31.7 mm
- J-02 Blast shield with 15° kink · 5″ · outline 128.7 × 42.3 mm · 34.0 mm
- J-03 Barrel barricade · 4″ · 101.6 × 38 mm · 28.0 mm
- J-04 Sandbag V with armoured shield and vision slit · 2.75″ · outline 77.2 × 38.0 mm · 34.0 mm
- J-05 Sandbag arc · 4″ · 101.6 × 38 mm · 26.8 mm
- J-06 Sandbag stub · 2″ · 50.8 × 28 mm · 26.8 mm
- J-07 Concrete corner, 90° · 4″ · outline 76.5 × 51.1 mm · 30.8 mm
- J-08 Concrete barrier, broken · 2″ · 50.8 × 26 mm · 30.8 mm
- J-09 Crate stack · 3″ · 76.2 × 28 mm · 31.4 mm
- J-10 Ammo crates · 2″ · 50.8 × 28 mm · 28.8 mm
- J-11 Pipe section · 4″ · 101.6 × 38 mm · 34.8 mm
- J-12 Armour plate · 3″ · 76.2 × 28 mm · 30.8 mm
- J-13 Gas cylinders · 4″ · 101.6 × 38 mm · 31.1 mm
- J-14 Barrel pair · 2″ · 50.8 × 26 mm · 28.0 mm

### Game use

Rules for Warhammer 40,000, 11th edition. Unofficial fan-made terrain. Not affiliated with or endorsed by Games Workshop. Warhammer 40,000 is a trademark of Games Workshop Ltd.

- Category: Light (suggested, agree before the game). Low, open covers that give cover but do not stop movement.
- Terrain area: each field defence is its own terrain area, its base plate. This includes the angled pieces.
- Levels: none. Models stand behind the covers on the table, so there is no Plunging Fire from J.
- Objective piece: no.
- Cover: a model behind a J piece is usually not fully visible and then has the Benefit of Cover. Light terrain areas are obscuring and allow Hidden.
- Terrain action: none.
- Tip: several pieces in a row form a long obscuring wall. That is legal, but check the lines of sight on long firing lanes before the game.

### Print settings

- PETG, 0.4 mm nozzle, 0.2 mm layers
- 3 perimeters, 4 bottom / 5 top layers, 15 % gyroid, 240 °C nozzle / 80 °C bed
- No supports, no brim. Each piece prints the way it stands on the table.
- The only bridges are the vision slit of J-04 and the forklift slots of J-07, 8 mm each.
- One plate A with all 14 pieces, 78 % of the bed used, at least 3.0 mm between pieces. Single pieces can also be printed on their own.

Print time and filament (PrusaSlicer 2.9.6 estimate, heat-up not included):

- A · J-01 to J-14 on one 220 × 220 mm bed: 23 h 55 min · 269 g

### What else you need

- Nothing but paint. No glue, no magnets, no dowels.

### Painting ideas

- Sandbags dusty khaki, plates olive with rusty edges, rivets brass, hazard bands yellow and black
- Barrels and gas cylinders red, olive and ochre, concrete light grey, crates wood brown, the pipe dark steel with a promethium red handwheel
- Drybrush the raised IDs ivory

### Works with the rest of the set

Promethium Line is a coherent terrain set in ten modules with one story. The mountain is the promethium source, drill station D taps it, and the pipeline H carries it past pipe bridge A and buffer tank B to the refinery with tower E and the bombed tower turned drill rig F. Loading yard G closes the chain. Craters K, the tanker wreck C and field defences J show the fight for it.

The J set is the cheapest way to fill the open ground between the big modules. One bed covers both the large 2.5 × 2.5 m table plan and the 44 × 60″ plan. See the Promethium Line collection for all modules.

### Files

- Model files: 14 single STLs (J01_6in.stl to J14_2in.stl), plus one PrusaSlicer 3MF project with the packed bed (job_A_field_defences_J01_J14.3mf). There is no G-code. Slice the 3MF project with your own printer profile.
- Other files:
- rules_card_J.pdf: one loose rules card for all fourteen, 85 × 54 mm
- TABLE_RULES_card.pdf: one card for the whole table (Core Rules reminder, objectives, terrain actions), two sides
- BUILD_GUIDE_J.pdf: list of all pieces, print plate and painting notes
- RULES.pdf: all set rules in full, with Core Rules references and the balance maths
- source_J.zip: the parametric source code, to change sizes and rebuild every STL
- Print all cards at 100 % (no page scaling). The Table Rules card has two pages: cut them out and glue them back to back.

### How it was made

Designed with AI assistance as parametric Python CAD code (build123d / manifold3d) and checked by automated tests: watertight meshes, overhangs of at most 45°, bridges of at most 10 mm, a cover check with horizontal sight rays along every piece and a PrusaSlicer run for the plate. It has not been test-printed yet. There are no fits to get wrong, but the thin feathered base rims and bed adhesion are not proven on a real printer. Makes and feedback are very welcome.

Tags