Satyr 3 Headphone Grille Generator - 12 Grilles plus a Browser Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
12 print-ready Satyr 3 headphone grilles plus a free browser tool to design your own.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Twelve replacement front grilles (fasciae) for the Satyr 3 DIY headphones, and the free tool that made them. Print one of the twelve as it is, or open the tool and design a pattern of your own.
Design your own Satyr 3 grille
The generator runs in your browser: Satyr 3 Grille Studio. The source code is on GitHub.
Pick a pattern family (breeze block, corduroy, coffer, tread plate, basketweave, facade, bakelite, terrace or nature), tune it, set a target open area and a minimum wall, and download a print-ready STL or an SVG. It is free and open source, with no account and no ads. The tool has 23 presets in those nine families, plus six earlier families, and the twelve files here are twelve of those presets.
The twelve print-ready grilles
Open area is the share of the 70.6 mm perforated face that is cut away. Mass is for PETG (1.27 g/cm³). Both are measured on the STL files.
File | Pattern | Open area | Min wall | Mass |
|---|---|---|---|---|
breeze_block | Breeze Block - quatrefoil screen wall | 36% | 2.2 mm | 28.3 g |
giraffe | Nature - rounded coat patches | 48% | 3.0 mm | 27.0 g |
sand_ripple | Nature - wind ripples on a dune | 35% | 2.2 mm | 28.3 g |
coffer | Coffer - brutalist coffered ceiling | 32% | 2.6 mm | 28.6 g |
pine_cone | Nature - phyllotaxis scales | 49% | 2.2 mm | 26.9 g |
barbican | Facade - balcony slabs | 42% | 2.2 mm | 27.6 g |
corduroy | Corduroy - ribbed concrete | 39% | 2.2 mm | 27.9 g |
beech_leaf | Nature - leaf veins | 27% | 2.7 mm | 29.1 g |
bakelite | Bakelite - valve radio speaker | 23% | 2.8 mm | 29.5 g |
harlequin | Breeze Block - diamonds in running bond | 23% | 2.3 mm | 29.5 g |
terrace | Terrace - 70s squircle steps | 39% | 2.2 mm | 28.0 g |
basketweave | Basketweave - paving bond | 28% | 2.0 mm | 29.0 g |
The grille body and mounting holes
All twelve files share one body: 94 mm across, 8 mm tall, a 70.6 mm perforated face that is 2 mm thick, and two blind mounting holes. Each hole is 4 mm wide and 6 mm deep, with 2 mm of material above it, and the two are 77.6 mm apart. The body was measured from Aplo's Satyr3 Alternate Fasciae, which was the starting point for the generator.
Print it face down
Flip the part in the slicer so the perforated face lies on the bed. Face down, the 45° chamfer is the steepest overhang, so no supports are needed, and the mounting holes open upwards.
Suggested for a Bambu Lab P1S with a 0.4 mm nozzle: 0.16 mm layers, 3 walls, 4 top and bottom layers, 15% gyroid infill.
PETG at 240 °C, bed 80 °C. PETG-CF works too.
26.9-29.5 g per grille in PETG.
The pictures are renders of the STL files, shown in filaments from my own shelf: matte and glossy PETG, PETG-CF, clear and translucent PETG, silk and dual-colour silk PLA.
Credit and license
Adapted for Satyr 3 from Satyr3 Alternate Fasciae by Aplo. Its files (Interlocking_Slots_A.stl) were the measured base and starting point for the generator. Original design: Satyr 3 DIY HiFi Headphones by its original author. Both are licensed CC BY-NC 4.0. Changes: new front patterns and a parametric generator.
Grilles made with this tool are for non-commercial use only. This is an unofficial fan tool, not affiliated with or endorsed by Aplo or the Satyr 3 author. "Satyr 3" is used only to describe compatibility.
More from Soundblooms: soundblooms.com. Questions or ideas? Discord.