SKÅDIS Tea Station - Tea Bag Box and Mug Hooks, Moroccan Tile Front
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pegboard tea station: box for 10 standing tea envelopes, two mug hooks and a flush 3-colour geometric tile front.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A tea and coffee station for the IKEA SKÅDIS pegboard: a box that holds 10 tea envelopes standing up, plus two mug hooks at the sides. The front tile is a Moroccan-style geometric pattern (8-point stars in octagons) inlaid flush in mint green, bone white and terracotta.
Details
Box: 80.8 × 94.5 × 57.4 mm, so it stays close to the board. Inside 74 mm wide, 81.7 mm deep and 55 mm high: 10 envelopes of up to 70 × 75 × 8 mm stand in a row and stick out 20 mm at the top so you can grab them. The U-shaped notch in the front tile lets you press and lift the front envelope one at a time. Diamond windows in the sides show how many are left.
Front tile: 75.8 × 55 × 2.4 mm, printed face down so the 0.8 mm inlay is perfectly flat. It slides down into two grooves at the front of the box and cannot fall forward. Small "HANMA" text at the bottom.
Mug hooks: each one hangs from its own SKÅDIS clip, 80 mm to the left and right of the box. The arm reaches 67 mm out and slopes down into a notch with a raised tip, so the handle settles there and cannot slide off. Fits handles with an opening of 25 mm or more. Printed lying on their side, so the layers run along the arm (the strong direction).
One plate for the A1 mini with the AMS lite (171 × 165 mm): box, front tile, 2 hooks and 5 clips (4 + 1 spare). Bambu Studio: 4 h 15 min, 106 g (mint 68 g, bone white 12 g, terracotta 27 g). No supports: the only overhangs are 45° (diamond windows and the chamfer under the back band).
Mounting
Slide the front tile into the box from above. Push a clip down into each pocket at the back of the box (x = 0 and 40 mm, two slots apart) and into each hook. Hold the part 8 mm higher than its final position, push the clips through the slots and let it drop: the hooks catch behind the board. The box goes on one row of slots, the hooks on the same row, two slots further out on each side.
How it was checked
Everything was checked in OpenSCAD with collision volumes, each with a control that must collide:
Pegboard fit (common SKÅDIS test): each clip goes in raised 7.8 mm and drops without touching the board (0.000 mm³); a mounted clip cannot be pulled out (90.5 mm³) or pushed in without lifting (64.1 mm³). The mounted box and hooks do not touch the board or the clips (0.000 mm³), the clips drop into their pockets from above (0.000 mm³), the whole assembly hangs without touching (0.000 mm³) and cannot come forward (231 mm³). Also passed with all 4 clips.
A stack of 10 envelopes of 70 × 75 × 8 mm fits standing (0.000 mm³). The front, middle and back envelopes come out and go back in from the top without touching (0.000 mm³). Control: an 80 mm wide envelope collides (2209 mm³).
The front tile slides in from above without touching (0.000 mm³) and cannot come out forwards (207 mm³).
Two simplified mugs (Ø80 × 95 mm, handle opening 50 × 25 mm) hang from the hooks without touching the board, the box or the clips (0.000 mm³), at least 14.5 mm from the board. Control: 0.5 mm lower the handle sits into the hook (57.6 mm³), so the mug really rests on it; with the hook 25 mm closer, the mug would hit the box (4921 mm³).
The three colour bodies do not overlap (0 mm³). OpenSCAD source included.
About this design
Designed with AI assistance and checked in code before release (see above). Pictures are 3D renders and the slicer preview, not photos. Not printed yet: makes and feedback are very welcome.
Español
Estación de té y café para el tablero IKEA SKÅDIS: caja para 10 sobres de té de pie (hasta 70 × 75 × 8 mm) con muesca frontal para sacarlos de uno en uno, dos ganchos para tazas y frente con mosaico geométrico de estrellas de 8 puntas incrustado en menta, blanco hueso y terracota. Una placa del A1 mini: 4 h 15 min, 106 g, sin soportes.
العربية
محطة شاي وقهوة للوح IKEA SKÅDIS: علبة تتسع لعشرة ظروف شاي واقفة (حتى 70 × 75 × 8 مم) مع فتحة أمامية لأخذها واحدا تلو الآخر، وخطافان للأكواب، وواجهة بنقش هندسي مغربي بنجوم ثمانية مطعمة بالأخضر النعناعي والأبيض العاجي والطيني. لوح واحد لطابعة A1 mini: 4 ساعات و15 دقيقة، 106 غ، بدون دعامات.