IKEA STENKOL Mountable Battery Storage (AA & AAA)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A gravity dispenser for AA and AAA batteries that mounts directly to your wall outlet using the IKEA STENKOL charger.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this 3D printable model because I wanted to combine an IKEA STENKOL charging station with a convenient battery dispenser to keep your rechargeable batteries organized and ready to use.
Key Features
Integrated Charging Station: Securely holds the IKEA STENKOL battery charger at the top of the unit.
Gravity-Fed Dispenser: Features a track directly beneath the charger to store and dispense batteries. It holdes ~ 10 AA and 11 AA.
Multi-Size Compatibility: The dispenser accommodates both AA and AAA batteries.
Direct Outlet Mounting: The frame wraps around the STENKOL charger, allowing its plug prongs to pass cleanly through the back to mount the entire assembly directly to your wall outlet.
Versatile Placement: Designed with a stable base so it can also be stored freestanding on a desk or shelf.
Suggested Print Settings
Orientation: I printed it exactly as it stands upright on a Prusa CORE One+, and it worked flawlessly.
Walls: Go with an Outer-Inner wall printing sequence to minimize the visibility of inner walls on the surface finish.
Infill: 15-20% grid or gyroid for structural stability.
Supports: Check your slicer preview; minor supports may be needed for the overhangs where the charger sits or the dispenser curves.
Designer Notes
I tried to keep the model's rear clearances generous enough to account for different sized wall sockets, but I can only verify this with the European (EU) plug model.
If you have requests or suggestions, I would love to hear them and implement updates (for example, a desk-only version to save on filament). Let me know in the comments!
Credits
This model was designed entirely from scratch to integrate a gravity dispenser with the IKEA STENKOL charger. Thank you @ORM_649441 for the inspiration and dispenser dimensions: