Airrobo T20+ Vacuum Robot Broken Pogo Pin Receptacle Repair
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The pogo pins tend to break and are not stable in the housing. – Die federbelasteten Pins brechen aus und sind locker.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Do not overtighten screws during assembly. Otherwise, the plastic will crack. Remove the little plastic extrusions next to the connector, as needed. Use hot glue or epoxy to hold metal contact in place. – Die Schrauben nicht zu fest andrehen beim zusammenbauen, sonst reißt das Plastik. Die kleinen Plastiknasen innerhalb des Gehäuses nach Bedarf entfernen. Den Metallkontakt mit Heißkleber oder Epoxidharz befestigen.
Online CAD Resources: https://cad.onshape.com/documents/7b92d609182c8dfe89be124b/w/f35e3d94c43b07f7d991b582/e/afb0c18315a8e900fde36b16?renderMode=0&uiState=6abf0b9e775cfac698ea1647