1 / 2
Valve Index Frunk 40mm Fan Mount Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for a single 40mm fan to be used in the Valve Index's "frunk"
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 76
- Makes
- 0
- Views
- 994
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution
A remix based off of RandomMode's dual fan design
I used their model files to create a single fan variant, as I didn't want to use two fans. This model also includes a slot for a SDPT switch to turn the fan off and on.
I don't include a fan grill, but if you want to use one, I used the one here
You will need:
- A 40mm fan. I used the Noctua NF-A4x10.
- A USB Type A Male plug
- A SPDT switch linked above
- Some wire, solder, and soldering iron
- Screws and nuts for the switch. I used M2
- Either screws or silicone mounts for the fan. The Noctua NF-A4x10 includes some silicone ones that I used and trimmed
Note: Make sure you solder to the correct lead on the USB plug. Positive needs to be on the correct one else it won't work
Printed in PLA at 0.2 layer height