1 / 3
Toy crutches
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Crutches for playing, made from wooden sticks (20mm in diameter) and 3D printed parts.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
My daughter wanted to play with crutches...
I use 20mm hardwood sticks, about 1 meter long for each crutch.
The middle section must be printed with thick walls and dense infill. I used 5 walls and 35% infill. Rotate the middle section as on the picture to avoid relying on layer adhesion.
The wooden sticks are attached with screws and I add epoxy to strengthen the assembly.
The bottom pad and the handle cap are printed in TPU.