Mooer Prime P2 Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for Mooer Prime P2. 20g of filament needed.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 10
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
Prime P2 Stand — Light (V4)
A compact desk stand for the Prime P2. The device rests at about 56°, angled for viewing. The slot fits a 20 mm thick device with roughly 0.5 mm clearance.
Features
Honeycomb back wall and an open floor to save plastic
Centered slot in the front wall, so light from the device can pass through
0.6 mm recesses on the bottom for four 8 mm silicone bumper feet
Prints without supports
Specs
Footprint: 70 × 80 mm, height: 40.5 mm
About 18 cm³ of plastic (~23 g PETG)
Print settings (OrcaSlicer)
Orientation: flat side down, as supplied
0.2 mm layers, 4 walls
Supports: none
Turn off Extra perimeters on overhangs for clean bridges over the bumper recesses
Files: .3mf (ready to slice), .step (for remixing).