1 / 3
Frugal Inker — image 1
1 / 3

Frugal Inker

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A small ink well to help fill a fountain pen with the last few mL in the bottle.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
13
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Frugal Inker

The frugal inker is an ink well for filling a fountain pen, the Jinhao 82.  Other pens may fit as is, or the .stl may be adjusted in width or height to suit pens of various dimensions.  If wholesale adjustments of the .stl don't work, you can modify the source file: frugal_inker.scad.

The inker has two special features: One, earning it the frugal descriptive, is that it fills with very little ink, so it is an ideal tool for filling a pen with the last few mL in the bottle.  I use an eye dropper to transfer the ink from bottle to well.  The second feature is that the nib is suspended a mm or two above the floor and thus makes no contact with anything other than ink.

The well is composed of two tubes connected at their bottom with holes through the inner tube.  Near the top there's a line indicating a maximum level for the ink. Before filling the inker, empty the pen's own ink into it. Using an eye dropper, fill the inner tube to its limit line.  The outer tube will also fill, but will lag behind a little. I stop when the ink in the inner tube has reached its line whether or not it also has done so in the outer tube. Insert the pen until it bottoms out; there is a ridge in the inner tube that butts against the pen's section and thereby keeps the nib's point from contacting the bottom.

Ordinary PLA is fine with 100% infill as a guarantee against leaks.  Print without supports.  Ask your slicer for two filament changes for the limit lines, the first at about 27 mm and the second, to return to the original colour, at about 28 mm.  On my Prusa mk4 the first stop was at 30 minutes into the print, or roughly 3/4 of the total time, and the second stop shortly after.

Tags