Arduino Due Enclosure with Connector Terminal Strip and Extra Space for Cable Management | Part of my MMU Retractor Project
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Arduino Due Enclosure with Connector Terminal Strip and Extra Space for Cable Management | Part of my MMU Retractor Proj
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The enclosure provides plenty of space for cable management, even with a large number of wires. It also supports a 9-pin connector using a breakaway male PCB pin header.
Double-ended PCB header pins can be secured to the "Front-Side-Wal-and-top" part using "Part-A" and two M3 screws, creating an external connector strip.
On the inside, the wires can either be soldered directly to the pins or connected using removable female connectors.
The removable cover allows you to work on the internal wiring without removing the connector strip. The data cable can also be easily disconnected and reconnected.
The cover features an engraved polarity marking to prevent incorrect cable connections.
To prevent the M3 screw heads from damaging the Arduino Due PCB, you can use the included spacers or M3 screws with smaller heads.
Correct the part names and spellingMake the assembly instructions more precise