1 / 10
EVA Swim Buoy Carry Handle — image 1
1 / 10

EVA Swim Buoy Carry Handle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A practical 3D-printable carry handle for EVA foam buoys used in open-water swimming. The design uses two flat anchors i

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
10
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

EVA Swim Buoy Carry Handle — No Metal Hardware

A practical 3D-printable carry handle for EVA foam buoys used in open-water swimming. The design uses two flat anchors inserted into simple slits in the foam, with no straps around the buoy, no through-holes, and no metal hardware.

The handle features a contoured grip and a separate mounting base. The handle and base fit together by pressure; cyanoacrylate glue can be added to this connection, but is optional.

Two anchor designs are available: a solid version and an open-frame V2 that uses less material. Both versions have been printed and successfully installed on the buoy shown in the photos.

WHAT TO PRINT

Print one handle, one base, and two anchors. Choose either the solid anchors or the material-saving V2 anchors.

PRINT SETTINGS

  • Recommended material: PETG.

  • Alternative materials: ABS, ASA, or nylon.

  • PLA is not recommended, as it may not provide sufficient durability for this application.

  • Supports: none.

  • Walls: 4.

  • Infill: 15–25%.

  • A complete set fits on a 230 × 230 mm print bed.

ASSEMBLY

  1. Check the fit of all printed parts before applying glue. Use the base as a positioning guide to mark the two anchor locations on the EVA.

  2. Make one simple slit for each anchor. Insert each anchor firmly into the foam, leaving its connecting tab exposed above the surface. The anchors do not need to pass all the way through the buoy.

  3. Apply cyanoacrylate glue inside each slit to secure the anchors.

  4. Press the handle ends into the matching holes in the base. This is a pressure-fit connection; glue is optional at this joint.

  5. Apply cyanoacrylate glue to the underside of the base and to the exposed anchor tabs.

  6. Fit the handle-and-base assembly onto the anchors, then press the base against the EVA until the adhesive sets. Allow the adhesive to cure fully before carrying the buoy.

Use cyanoacrylate compatible with your foam and printed material, and test it on a small area before assembly.

CUSTOMIZATION

Four STL models are provided: handle, base, solid anchor, and open-frame anchor V2. STEP and Fusion 360 (.f3d) files are also included for editing the geometry and adapting the design to your buoy.

The photos show the printed parts, the anchors inserted into the EVA before final assembly, and the completed handle installed on the buoy.

Hope you find it useful!
If you print it, please share a make!

Tags