Vileda Mixer 3 Hinge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement hinge for Vileda Mixer 3 cloth dryers
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Public Domain
Original part had one arm that broke, since the type of plastic is not known it's difficult to know if gluing would be successful. The replacement does not fully match the original's function as the arms open together.
Hole diameter for the arms is 17.5mm, one or two layers of electrical tape can make the fit more secure.
The design is over engineered, with multiple bearings to have it rotate smoothly. One could alternatively rework this into a print in place model or one with a single screw holding it together.
As it is the additional hardware required are:
M4S heat set insert (5.6mm OD, 5mm deep)
M4x20mm screw
3x1 Oring (or a very thin washer)
MR74ZZ ball bearing
51100 axial bearing
4x5mm ball plungers
The plungers are optional, they don't really snap the arms into place because the leverage is high.