A2212-DriveMount 1/10 (DKS Basic Edition)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
his 3D model is a custom mounting bracket and enclosure designed to integrate a standard A2212 brushless outrunner motor
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
This 3D model is a custom mounting bracket and enclosure designed to integrate a standard A2212 brushless outrunner motor into a 1/10 scale radio-controlled (RC) vehicle chassis.
JPG
The design securely houses the motor while providing the necessary mounting points to align the drivetrain and mesh properly with the pinion gear.
JPG
Key Design Features
Custom Enclosure: The barrel-shaped internal cavity houses the A2212 motor body (standard diameter of ≈28 mm), protecting it from direct impacts on the chassis.
JPG
Stock Shaft Clearance: The lower structure features dedicated clearance to allow the original metal output shaft to spin freely without friction.
JPG
Integrated Mounting Geometry: Equipped with integrated base tabs and mounting holes for rigid fastening to a 1/10 RC chassis.
JPG
Reinforced Structure: Designed with top and bottom ribbing to ensure mechanical rigidity against motor torsional torque without adding excessive weight.
JPG
Recommended 3D Printing Parameters
Recommended Material: PETG, ABS, or ASA (for higher mechanical strength and heat tolerance against motor warming).
Infill: 40%−100% (Cubic or Gyroid pattern recommended to absorb vibrations).
Walls / Perimeters: Minimum 4 perimeters.
Supports: Required for the overhangs inside the internal motor cavity and under the mounting tabs.
JPG