Shaker Container with Screw on Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
June 22nd 2021- made larger holes in lid, old ones were too small...Also made it so you don't need supports to print…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 97
- Makes
- 0
- Views
- 611
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
June 22nd 2021- made larger holes in lid, old ones were too small...Also made it so you don't need supports to print the lid, after printing clean out the holes and you should be good to go.
This is a shaker container I made for grated parmesan cheese. Can be used for sugar, spices, large grain salt etc....
I've included the embossed container with "Parmesan Cheese" on it and a plain container.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.20
Infill:
20-100
Filament:
Sakata PLA
Notes:
The lid and the spinner need support. I used a gyroid support pattern, as it gave a good finish and was easy to take off. I printed the lid thread side down, and the spinner upside down. Also print the lid solid, I had an issue where the walls around the hole the spinner snaps into broke off.
Category: Containers