Dayton Audio TT25 shaker mount for Wupro Gallery screen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reduce laser speckles using this Dayton Audio TT25 vertical mount for use with fixed projector screen
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Laser speckle can be annoying with laser projectors if you're sensitive to it.
Following the discussion started here: https://www.avsforum.com/threads/laser-speckle-reduction-via-vibration-example.3345388/, I adapted the idea for my own setup.
The idea is to transmit gentle low-frequency vibrations to the screen. Each tiny movement rearranges the speckle pattern, and because it changes faster than your eyes can follow, the speckle blurs into a smooth image and becomes much harder to notice.
For this setup to work you'll need the following:
1- 2x Dayton Audio tactile transducer TT25-8 (https://www.daytonaudio.com/product/1104/tt25-8-puck-tactile-transducer-mini-bass-shaker)
2- An amplifier that can play mp3 from an SD or USB card (I used a cheap AK45 found on amazon, it's great for the price and has its own power supply https://amzn.asia/d/06vvUBd5)
You'll find 3 models attached:
a TT25 holder for fixing it vertically to a flat surface.
a TT25 holder to attach to a WUPRO Gallery fixed screen
A drill guide to drill three holes in the screen aluminium frame
I have a few projector screens and those two will work for the majority of them, not just Wupro.
Per holder (both versions): attaching the TT25- 6 × M3 heat-set brass inserts, M3 × 6 mm long × 5 mm OD (the "M3x6x5" size)
- 6 × M3 × 8 mm screws, through the TT25's tab mounting holes. The brass centre hole in each tab holds the TT25 together; don't use it for mounting.
Per rail mount (Wupro gallery version): attaching it to the frame- 3 × M4 heat-set brass inserts, M4 × 8 mm long × 6 mm OD (M4 × 6 × 6 also fits)
- 3 × M4 screws: M4 × 10 or × 12 screws
- 3 × M4 washers
- Loctite 243 (medium strength, removable). Not 263, which is permanent.
Flat-surface version instead: strong double-sided tape (Gorilla black worked; avoid thick foam tape) or screws through the base.
Tools and consumables- 4.5 mm drill bit plus the printed drill jig, one fresh jig per set of holes (as they get easily damaged when drilling)
- Soldering iron with an insert tip
- Something to keep swarf off the fabric while drilling, best to use a vacuum cleaner while drilling.
- Optional: felt or tape where the frame's aluminium parts touch, to stop rattles
Totals for two units (rail version): 12 × M3 inserts, 12 × M3 × 8 screws, 6 × M4 inserts, 6 × M4 screws, 6 × M4 washers.
Thanks to Dayton Audio for providing the CAD files for their device enclosure.