Raspberry Pi 400 2020 Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi 400 2020 Mount originally made to mount to a Voron V2.4
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 109
- Makes
- 1
- Views
- 1,852
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
This mount is for mounting a Raspberry Pi 400 to 2020 series extrusions. All IO is still accessible, assuming normal-ish sized cable ends.
Parts List, Socket Head or Button Head for any screw is fine:
2x M3x30
2x M3x12
4x M3 Heat Set Threaded Inserts
2x M5 T-nuts (any kind is fine)
2x M5x15, M5x20 OR M5x25: 15mm no spacer, 20mm 6mm spacer, 25mm 9mm spacer
You'll have to find the correct M5 screw size for you're setup when using different spacers,
Since spacers to not span across the slot of 2020, do not crank down on the M5 mounting screws.
Spacers are mainly meant to clear the side panels on a Voron.
Printed in Zyltech White ABS
PRINT SETTINGS
No supports
0.2mm layer height recommended
4-5 shells
20% infill