1 / 2
ClosetMaid Wire Shelf Filament Rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hanging rack to store filament
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
This will allow you to store your filament underneath 16" Closetmaid wire shelving. The holes are sized for 1/2" dowels, but due to wide variations in dowel sizes, some adjustment may be necessary. I used the closed model on the ends with an open model in the middle to support the dowels, but you could probably use the open model only. Due to the size, a larger format printer is required to print.
I printed with 4 layers for the top and bottom and 4 perimeters with 15% infill and it seems to be strong enough.