1 / 4
QI2 magsafe charger compatible with Honda Civic 10 gen — image 1
1 / 4

QI2 magsafe charger compatible with Honda Civic 10 gen

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

QI2 magsafe charger compatible with Honda Civic 10 gen

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
41
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

Replacement wireless charger for the lacklustre oem one.

I have model it around low cost qi2 charger from amazon that has magsafe. To make sure that phone sits flat there are two indents to accommodate camera lenses. I have design all the features with my own phone in mind (Pixel 10 pro), but I made the indents large enough that they might fit most phones. Top is a separate element in case you would like to change it to fit your phone.

Included two 40mm fans ducts to keep phone cool, since wireless charging can heat it up. I have used Noctua for silent operation.

Links to hardware I have used:

Fans - https://www.amazon.co.uk/dp/B009NQLT0M

Pins - https://www.amazon.co.uk/dp/B0F9P1R338

Charger - https://www.amazon.co.uk/dp/B0HF37Y91Z

Power Module - https://www.amazon.co.uk/dp/B0D3TRMQRK

I have included a space for fan controller but Noctua fans are so silent there is no need for controller.
Make sure that the pins are connected to black (negative) and thicker red (switched positive) pins on the oem plug. The thinner red pin is for constant battery feed and you don't want this to drain your battery.

I have printed this in ASA for temperature protection, but I guess ABS or PETG will do too. I would definitely not recommend to use PLA, it will not survive heat inside on sunny day.

My Printing settings are
Standard supports 
15% Gyroid infill
2 walls

Please reuse the clips from your own unit or print some using below source
https://www.thingiverse.com/thing:4854306

I have used some glue to attach fan covers and clip posts but all are push fit and using no glue should be ok too.

Tags