PC MINI-ITX CASE - Additionnal parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are custom parts I made for the ITX case made by oximoron_fr. Front panel The hole for the power button have a…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 408
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
These are custom parts I made for the ITX case made by oximoron_fr.
Front panel
The hole for the power button have a diameter of 16mm and has been designed for this power button by averypierce.
The holes for the LEDs are 3.25mm wide.
004A for bigger fan
The fan I had on hand is about 25mm thick and with the original the fan would collide with the motherboard.
I also had nothing good on hand to attach the fan so I made a M5 screw and nut that I added here as well (YMMV, I had to make the hole in the nut about 10% bigger, otherwise I could get the screw to fit in it)
I also used this is the fan guard by pwing. Simple design, not restrictive on air flow. There are plenty of other designs out there too.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.24mm
Infill:
20%
Filament: 3D Printing Canada PLA Transparent Blue and Orange
Notes:
I printed this in PLA, since the fan is pushing a lot of air I'm not worried about heat building up in the case, it shouldn't warp. However if you're not going to use a fan, maybe PETG would be better? I don't know. These boards don't get too hot.
Category: Electronics