SKÅDIS clip for Sonoff ZBDongle-E Zigbee dongle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds a Sonoff ZBDongle-E upright on IKEA SKÅDIS, antenna up, on a USB extension away from USB3 noise.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stands a Sonoff ZBDongle-E (75 x 25.5 x 13.5 mm aluminium body) upright with the antenna up and the USB plug down through an open floor into a USB extension lead. That lets it sit 30 to 50 cm away from your mini PC and USB3 drives, because USB3 noise wrecks 2.4 GHz Zigbee. The body rests on two 4 mm ledges either side of the plug, crush ribs on the side walls hold it snug and front lips keep it in.
Hangs on ONE hook bar (included). Print upside down (open top on the bed), no supports.
Print settings: PETG, 0.2 mm layers, 4 walls, 25% gyroid, no supports.
Editable OpenSCAD source: https://github.com/PrimroseHA/skadis-network-mounts
Other parts in my SKÅDIS network rack:
Hook bars (start here): https://www.printables.com/model/1866142
TP-Link Omada POE380S injector: https://www.printables.com/model/1866145
TP-Link TL-SG1024D 24-port switch: https://www.printables.com/model/1866147
Heatmiser neoHub v2: https://www.printables.com/model/1866148
Samsung SmartThings Hub v3: https://www.printables.com/model/1866154
Lightwave Link Plus L2: https://www.printables.com/model/1866155
TRIGKEY G4 mini PC: https://www.printables.com/model/1866149
2 x UGREEN 2.5" SSD enclosures: https://www.printables.com/model/1866157
Wall spacers and caps: https://www.printables.com/model/1866187