Extra Bouncy Puck (*Very Low Friction*)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The sliding bouncy puck isn't designed for heavy use like hockey and features 4 springs for 360-degree touch points.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This low-cost puck toy for cats, which can also be used for shuffleboard, is designed to be very bouncy and features four springs that provide 360-degree touchpoints. Assembly is straightforward: simply overlay the pieces and snap in the pegs. If the tolerances do not meet your needs, you can adjust the pegs by scaling them up or down in your slicer. If you encounter any issues with the files, please let me know so I can correct them. Note that this model is not meant for intense use; if you need a stronger puck, check out an alternative model. Just know that the model from NAM_3 is very good and strong, but the springs just don't work when you hit them in the middle. This design was based on this model; it's a really nice design.
This model is designed for PETG 2.0, and make sure to enable the "Alternate Extra Wall Loop" in the slicer settings, which can be found in the advanced section.