1 / 11
Key To Erebor Book Nook Mechanism w Halloween frame — image 1
1 / 11

Key To Erebor Book Nook Mechanism w Halloween frame

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is my book nook mechanism that works with the official "key to erebor keychain by weta workshop".

Rating
0 / 5
Likes
5
Downloads
5
Makes
0
Views
87
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

The Key to Erebor – Secret Storage Book Nook 🔑

A Lord of the Rings-inspired book nook compatible and works with the official Key to Erebor keychain by Wētā Workshop!

It may also work with the key to erebor models on printables if you scale it down, however i have not tried with the models. Only with the official key

This book nook features a hidden storage compartment with a spring-loaded locking mechanism. Perfect for displaying your Key to Erebor while keeping small treasures hidden inside.

What You'll Need

  • 4 mm diamter springs- commonly found in pens

Length of the springs - 

  • 26 mm spring – Single-spring design only I used a pen spring for this

  • 30 mm springs – Two-spring design - Note the 2 spring version is still beta version. It is a bit fiddly

Printing Instructions

  • Most parts printed without supports Prusa Core One +. I printed this in PETG on obsidian hardened nozzle 0.4mm

  • Supports are required for the spring-loaded components and gear/pinion

  • For the front frame print it vertically for the maximum details, it does not require supports however mouse ears or a very large brim i recommend. Either print it at 0.1 mm layer height, or variable layer height and having the layer heigh smaller at the detailed sections.

  • Print backframe flat on its back without supports (atleast my core one didn't need it.

🔐How It Works

Two-Spring Design (beta version right now):

  1. Press the Key to Erebor into the mechanism.

  2. While holding the key down, rotate it to move the rack.

  3. Release the key to lock the rack in place.

Note that the frames for two spring designs are not compatible with the 1 spring design

Assembly video/gif attached

Single-Spring Design:

  1. Press and hold the arrow.

  2. While holding the arrow down, rotate the gear to move the mechanism.

Assembly gif video atttached in the photos section

There is a community modded front frame, that is linked here and also lists the original models i used to make it: 

https://www.printables.com/model/1866503-key-to-erebor-mechanism-front-community-modded

Designed and made for a friend as a symbolic gift

~ By a Friend

Tags