1 / 3
Worker Harrier BCAR Shroud / Suppressor Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BCAR shroud / suppressor aesthetic mod for Worker Harrier
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a very snug fit on standard 16mm OD barrels. There are 2 additional fixing holes at 3 and 9 o'clock that line up with the front mounting screws for the side Picatinny rails, but the friction-fit with the barrel is enough to keep it in place. To use these fixing holes, remove the front mounting screws for the side rails, align the shroud, and screw in 2x M3 20mm countersunk screws until they bottom out.
Designed for 350mm barrel with Flag & Armor BCAR. Should fit other thinner BCARs like ZWQ (untested) and GFZ (untested).