1 / 4
Quntis Light Bar monitor mount for Dell U3425WE — image 1
1 / 4

Quntis Light Bar monitor mount for Dell U3425WE

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Description Quntis Monitor Light Bar Adapter for Dell U3425WE (Curved Monitor)

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

The Quntis monitor light bar won't sit properly on the Dell UltraSharp U3425WE because of the monitor's curved back. This adapter clips over the monitor's top edge and gives the light bar a flat surface with slots for its clamp to lock into. Extends with a flush, flat underside. 

  • The front slot is widened to 5.5 mm and deepened to 10 mm to take the Quntis front lip, which is about 5.1 mm thick.

  • A new 3.25 mm × 10 mm rear slot holds the clamp's rear lip.

  • There is 30.5 mm of solid surface between the two slots to suit the Quntis clamp.

  • The back extends with a flush, flat underside, so there's solid material under the rear slot.

Printing

  • Print it in the orientation provided, with the flat top face on the bed. It needs no supports.

  • PLA or PETG both work. PETG copes better with heat from the monitor.

  • Use 4 walls and 15–20% infill.

Fitting

Hook the adapter over the top centre of the monitor, then lower the light bar so its front and rear lips drop into the two slots.

Files

  • 55 mm adapter

  • Parametric OpenSCAD file, so you can change the slot widths, depth, gap and length for other light bars

Tags