Raspberry Pi Mount for On-Q Structured Wiring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting plate for two Raspberry Pi in On-Q structured wiring panels.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 62
- Makes
- 0
- Views
- 654
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
A mounting plate for Raspberry Pi in the official case for On-Q structured wiring panels. I made this to hang Raspberry Pi in the wiring cabinet where the main ethernet switch lives.
Uses the On-Q push-lock pins, but you could use wood screws and a washer if the panel was mounted on plywood.
The RPi cases can be attached to this plate with ¼" #4 wood screws.
Fusion 360 file provided for modification.
Print Settings
Printer: Ender 3 Pro w/ direct drive
Rafts: No
Supports: Yes
Resolution: 0.15-0.2mm
Infill: 15% or higher
Shells: 2+
Notes:
Print front flat with on the build plate to minimize required support.