1 / 1
Press-fit tolerance test – 5 holes + pin (Passungstest) — image 1

Press-fit tolerance test – 5 holes + pin (Passungstest)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Block with five square holes (0.00–0.20 mm clearance) and a pin: find the fit your printer needs.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
15
Reviews
0

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Fit test for press-fit and snap-fit parts.

A flat block with five square holes, marked with 1 to 5 notches, and one pin. Clearance per side: 0.00 / 0.05 / 0.10 / 0.15 / 0.20 mm. Push the pin into the holes one after another. The hole where it sits tight but still goes in with thumb pressure shows the clearance your printer needs.

Printing: 0.4 mm nozzle, no supports, parts are already oriented, any colour. The plate file contains block and pin together, the two other files are the single parts.

Deutsch: Passungstest für Steckverbindungen – Block mit fünf Löchern (0,00 bis 0,20 mm Spiel je Seite) und ein Stift. Das Loch, in dem der Stift stramm sitzt, zeigt, welches Spiel dein Drucker braucht.

This is the test that comes with my snap-fit 1:24 house kits (half-timbered cottage, log cabin, Swedish house). They are designed for hole 3 (0.10 mm). Kits and build guides (in German): https://steckwerk.netlify.app

Tags