1 / 4
30mm Lift kit Caddy
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My caddy 4-motion had 70mm difference in height front/back and locking really stupid so I made a 30mm front lift kit.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Printed with 0.6mm nozzle 10 perimeter, 10 top/bottom layer 80%infill. file is for 30mm lift kit, just change Z value to change spacer.
You need to chamfer center hole to fit strut top.
And you need longer bolts, original bolt is 23mm.
30mm is fitted without removing strut, only remove top bolts and press down strut.