1 / 2
Face Tracking Camera Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact design camera case made for use with the CG0308 camera with an M5 screw thread and a non destructive design
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I decided to make my own camera case design for using with this specific unit you can find on aliexpress, its a 160 degree black and white model.
Personally i wasnt a fan of how you had to destroy it to take it apart when you could easily just friction fit the case together
my personal print settings:
5 Wall Loops
5 Bottom Shell Layers
5 Bottom Paint Penetration Layers
30% infill
V2 case features a larger back so you can engrave your own name into it (cut 1.5 - 2mm) and adjusted fitting posts