1 / 2
Office Chair Caster to Screw-Mount Adapter – 11 mm / 7/16" — image 1
1 / 2

Office Chair Caster to Screw-Mount Adapter – 11 mm / 7/16"

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter for mounting standard 11 mm / 7/16" office chair casters to furniture using a screw-mounted base.

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
23
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

11 mm / 7/16" Office Chair Caster Screw-Mount Adapter

This adapter allows standard office chair swivel casters with an 11 mm (approximately 7/16") stem to be mounted on surfaces where a conventional screw-mounted caster is required.

The caster stem fits into the vertical socket, while the square base can be screwed directly to furniture, carts, cabinets, workbenches, storage units, or other DIY projects.

The model is compact and designed to reuse inexpensive and widely available office chair casters instead of requiring dedicated plate-mount wheels.

Real-world use

I designed and used these adapters to add office chair casters to a barbecue grill.

Standard office chair casters are commonly rated for around 50 kg per wheel, although the actual load capacity of the complete assembly will also depend on the printed material, print settings, mounting screws, and surface.

For applications such as a typical barbecue grill, the required load per caster is usually well below that value.

Dimensions

Approximate overall size:

43.5 × 43.5 × 23 mm

Designed for caster stems approximately:

11 mm / 7/16" diameter

Uses

  • DIY furniture

  • Workshop carts

  • Storage cabinets

  • Mobile stands

  • Small tables

  • Equipment bases

  • Repurposing office chair casters

Printing recommendations

For functional use, PETG, ABS or ASA is recommended because the part can be subjected to lateral loads and impacts.

PLA should also work for light-duty applications.

A relatively high wall count and good layer adhesion are recommended for heavier loads.

Because printer tolerances and caster stems can vary slightly, check the stem fit after printing. If necessary, the socket can be lightly sanded,

Tags