Yet Another Fidget Infinity Cube Rounded - Smaller, Stronger and Tighter.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I really like the YAFIC v2 rounded model, but I wanted a smaller size with a few other optimizations.
- Rating
- 5 / 5
- Likes
- 79
- Downloads
- 664
- Makes
- 7
- Views
- 1,710
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
Printing Tips
This model is sized for a 0.1 mm layer height anything more than that will probably fuse. The space between the model and the hinge is a single layer at 0.1 mm.
If the hinges are sticking an adjustable wrench can provide good leverage at the hinge to free them.
I'm using Orca Slicer with 3mm Scarf Joints everywhere so the seams don't fuse in the hinges.
With the rounded edge the second layer has a bit of an overhang. Setting the outer wall width to 0.7mm prevents the unsupported line.
The vertical hinges will be initially tight, but should loosen up with a few minutes of using the fidget.
With 99% infill and PLA it weighs about 47g.