22mm Target Patch Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Patch dispenser designed to accommodate 22mm square patches.
- Rating
- 4.429 / 5
- Likes
- 86
- Downloads
- 1,420
- Makes
- 7
- Views
- 5,212
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
Patch dispenser designed to accommodate 22mm square patches provided by Pistol New Zealand (PNZ) for IPSC targets. Features a check window and roll directional guide. Print flat side down.
Have printed once so far in PLA+, very strong and dispenses well. Might try it in PETG next.
U/W: https://pistolnz.org.nz/product-category/targets-and-target-patches/target-patches/
Update: turns out the roll starts binding in the center, so I've added a bushing for the middle to prevent this. Also added an additional structural support pillar to the mouth to stop the lid from rotating slightly out of alignment.
Update 2: The most recent batch of patches has a wider ribbon (31mm), and won't fit the older design. I have added a wider version to accommodate the new style patches. Lid remains the same, so simply re-print the body and bushing. I have also increased the tolerance between the bushing and spindle by 1mm, and the top and bottom by 0.25mm as some people were having difficulties fitting them together.
Update 3: After a few more test prints fixed incorrect center measurements, added some chamfering to reinforce walls and locking tabs.