1 / 4
3D print filament winder for Tormek T8 — image 1
1 / 4

3D print filament winder for Tormek T8

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple winding adaptor for the large Tormek grinder for a variety of filament spool sizes.

Rating
0 / 5
Likes
1
Downloads
6
Makes
0
Views
138
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

This adapter allows a filament spool to be attached to a Tormek T8 wet stone grinder.
The comparatively slow rotation speed of the grinder allows for a relaxed filament transfer.
The adapter can also be used on the older Tormek T2000 model.

It supports spool diameters of 50mm, 51mm and 52mm.
Spools with larger diameters can be mounted - but will probably wobble, when turning.

It supports spool widths between 55mm and 75mm, using spacer rings.
E.g.
   the black filament spool is 57mm wide => a 15mm + a 3mm spacer
   the red filament spool is 75mm wide => no spacers

Comes with a nifty holder :)

Tags