SKADIS BESTÅ adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
attach a SKADIS panel to the shelf holes on the side of a BESTÅ cabinet
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 5
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
This adapter can be attached to the shelf holes in the side wall of a BESTÅ frame, and can receive the mounting screw of a SKADIS pegboard. Two pieces are required
A 36 cm × 56 cm SKADIS will fit in the frame even if there is a 56 cm × 56 cm SKADIS on the back of the frame (I attached mine to a shelf using the desk connectors from IKEA).
You'll need four screws suitable for screwing in the shelf holes (I had plenty of leftovers from assembling a number of BESTÅ) to attach the connector to the frame. You can use the holes near the front and those near the middle, or if you don't have anything near the back you can use the holes near the front and those near the back.
Then attach the pegboard using its own screws into the slots of the adapter: the screw should create a thread into the plastic.
Use the original SKADIS feet to keep the bottom of the pegboard at the right distance from the shelf
Print with 4 perimeters for extra strength, but low infill.