Phone Collector

Introduction

At school I have to put my phone in a simple plastic box when I start the lesson. 24 phones one above the other, not the best! So I built a very practical case with 24 drawers (one for each phone) that can also be closed with the door to avoid accidents. On each drawer there's also a compartment for a name tag of the student (owner of the phone). That's my second 3d project, so you will maybe find some imperfections and I'll be grateful if you report them to me. I hope you'll enjoy the product!

Notes

I've shaped this for 24 phones but you can use less drawers or use the whole case to store other things.

What you need

• Files "piece..." from 1 to 12 printed

• Files "door part..." from 1 to 4 printed

• File of the door handle printed

• File of the feet printed 4 times

• File of the drawer printed 24 times (or less if you want)

• A screwdriver

• 6 screws

• Glue (you decide how much to use)

Assembling Guide

Main body assembly (take the parts from the Main Body folder)

You'll start by assembling the back part of the main body of the case, so take the pieces from 1 to 12 of the main body (the files are named like "piece 1 (bottom left behind)",  they are self-explanatory) and start to assemble!

1) Start gluing piece 1 and piece 2 (the names that I mention are the ones of the files) together fitting the appropriate connections.

2) Glue piece 3 to the piece formed (by pieces 1 and 2) fitting the appropriate connections.

3) Now, take piece 4 and glue it to piece 5 fitting the appropriate connections.

4) Glue piece 6 to the piece formed (by pieces 4 and 5) fitting the appropriate connections.

5) The next step is to glue the two parts formed (part 1&2&3 and part 4&5&6) fitting the appropriate connections.

Now, that you've built the back part of the main body, you'll make the front one and glue them together.

6) Glue piece 7 and piece 8 together fitting the appropriate connections.

7) Glue piece 9 to the part formed (by pieces 7 and 8) fitting the appropriate connections.

8) Glue the formed part (part 7&8&9) to the back of the main body (part 1&2&3&4&5&6) fitting the appropriate connections.

9) Now, take piece 10 and glue it to piece 11 fitting the appropiate connections.

10) Glue the formed part (by pieces 10 and 11) to the piece 12 fitting the appropriate connections.

11) To finish the main body, you have to glue the formed part (part 10&11&11) to the back (and the bottom part of the front) of the main body fitting the appropriate connections.

You should obtain this:

Door assembly (take the parts from the Door parts folder)

Now that you have assembled the main body, you need to assemble the door so take door parts 1, 2, 3, 4 and the door handle (the name of the file is like "Door part 1 bottom left"), these are the names I'm gonna refer to, before that please flip the main body previously formed so that the circle grooves are on the ground.

1) Take door part 1 and Door part 2 and glue them together fitting the appropriate connections.

2) Now, glue Door part 3 and Door part 4 fitting the appropriate connections.

3) To finish the panel of the door you have to glue the formed parts (part 1&2 and part 3&4) together fitting the appropriate connections.

4) To finish the door, you need to screw the orange handle to the door. Take the exact measurements from the 3d model (by the way the only important thing is that the two screws have to be vertically aligned).

Parts assembly

Now you can finally assemble the whole build.

1) Start by screwing the door to the hinge (that have to fit in the appropriate collocation of the door, where there's the hole), you need to align vertically the two screws and they need to be centered or the door won't fully close.

2) Now, you have to screw the other part of the hinge to the left internal side of the main body. Same as before, you need to align the two screws vertically and centre them.

3) The next step is to glue the feet to the main body, no measurement, just stick them on the right grooves under the main body.

4) The last step is to put all the 24 drawers (or less if you want) in the main body, just lean them.

Finally your case is finished.