Filigree Ornaments (Set 2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filigree Christmas Ornament
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are some Filigree style Christmas Ornaments. This is a set of three. There are more sets, go o my page to check them out. They are 2.5mm thick in the original design (The thickness will depend on print size), so nice and sturdy, but not too thick to be too much. They all have a hole at the top so you can easily pull a thread through. They are numbered from four to six in the file name as well as on one of the cover pictures. I will attach the single files and a gcode file for all three.
Print Settings:
You can scale them to your desired size, The original size is 10 by 7 centimeters.
Mine were printed in PLA, but PETG should work just fine.
I recommend using a brim so that adhesion and warp issues can be prevented, but it's not necessary.
The print time varies depending on size, but they generally shouldn't take long. I printed 3 at a time and they took around 1 hour.
Have fun printing and feel free to post your makes! Merry Christmas!
Note: The original artwork is not mine. I only created the 3D printable file.