Ventilated THRUSTMASTER TH8S Shifter Knob (S, M & L)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ventilated knob for the THRUSTMASTER® TH8S shifter: Multicolor/-material, press fit, orientation lock, sizes S, M & L.
- Rating
- 5 / 5
- Likes
- 65
- Downloads
- 91
- Makes
- 3
- Views
- 1,207
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Standard Digital File License
An ergonomic, ventilated knob for the THRUSTMASTER® TH8S shifter in the sizes small, medium (recommended) and large.
Check also my DRIFT Knob for the THRUSTMASTER® TH8S Shifter.
Please don't scale the parts: The thread and the fits are sized for the THRUSTMASTER® adapter.
Have fun!
Elements
Logo: Sits recessed in the crystal, its stem locking the crystal to the shell.
Crystal: Faceted top of the knob, slides onto two keys on the shell.
Shell: Main body with adapter thread, ventilation holes, grip indentations, side rests and keys.
Collar: Lock nut with three grooves that fixes the knob's direction and hides the flange.
You also need the official THRUSTMASTER® knob adapter.
Features
Ventilated: 30% of the shell’s indentations are holes that lead into an air chamber inside the shell. An inner core with six ribs keeps the shell stiff.
Multicolor / multimaterial: The knob is made of separate parts, so any single-material printer can produce a multicolor and/or multimaterial result.
Easy assembly: The crystal slides onto the shell, and the logo presses in to hold it there. No screws, no glue.
Orientation lock: The collar keeps the knob from rotating on the adapter.
Recommended Materials
Part | Material |
|---|---|
Logo | PETG |
Crystal | PLA or PLA+ (matte or translucent) |
Shell | PLA or PLA+ (matte) |
Collar | PLA or PLA+ (matte) |
Print Settings
Setting | Value |
|---|---|
Layer height | 0.20 mm – balanced (0.4 HF nozzle) |
Perimeters | 2-3 mm |
Supports | None |
Infill | 10-15% |
Print Orientation
Part | Orientation on the bed |
|---|---|
Logo | Face down, stem pointing up |
Crystal | Standing on its rear facet, joint face sloping upward |
Shell | Upright, on its bottom face |
Collar | Upside down, skirt pointing up |
Assembly
The exploded view shows the four parts from top to bottom: logo, crystal, shell and collar.
Assembling the knob
Set the crystal on the sloped top face of the shell, about 1 cm further above its final position.
Slide the crystal down the slope until its edges line up with those of the shell.
Push the logo's stem firmly and evenly through the crystal into the shell.
Mounting it on the shifter
Fit the adapter to the shifter as described in the THRUSTMASTER® instructions.
Screw the collar onto the adapter, wide opening (skirt) facing down.
Screw the knob onto the adapter.
Turn the collar up against the knob and tighten it by hand. The knob can no longer turn.