Sennheiser HD 25 adapter for Capra Heaband v3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yokes to adapt to the Capra Headband along with a headband with cable route for Sennheiser HD 25
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The yokes are a two part model, one part that attaches to the headband and one that attaches to the cups.
Heatserts and screws tie them together.
There are 3 versions of the lower attach to cups model
10 and 16 degrees for adjusting the clamping force along with a tilted one at about 25 degrees.
I prefer the 10 degree one but they all work so i will leave you to decide.
M3 "Voron" 5x4 heatserts and m3 screws required.
Print them completly solid with walls, just set walls to 20 or something.
They are pre supported but use supports anyway for the screw holes.
Print the headband solid with walls, 95A TPU like all other Capra headbands.
Remixed from
https://www.thingiverse.com/thing:7268598
CC - Attribution - Share Alike, couldn't include that because it for some reason collides with CC - Attribution - Noncommercial - Share Alike of the capra headband and printables wouldn't let me publish.