fashy water bottle cap
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.48 – €1.81 net (excluding VAT)
For file: hotwater cap v11_0.4n_0.15mm_PETG_COREONEL_1h52m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.64 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 1.87 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
spare water bottle cap for fashy hot water bottle
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Public Domain
Our cap for the fashy hot water bottle always finds the trash bin, so here is a spare one.
made in PETG
Added a cylinder in prusaslicer which irons the PETG after the seal, in the hope of making it more watertight. This leaves a rough edge, but does not affect the functioning.
no O-ring needed due to slope which seals off the rubber, like the original fashy cap