1 / 6
Sock clips rail (6/9 pairs) — image 1
1 / 6

Sock clips rail (6/9 pairs)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

for IKEA JALL drying rack

Rating
0 / 5
Likes
8
Downloads
21
Makes
0
Views
121
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial

The IKEA JALL drying rack is very popular. But socks can take a lot of space on it.

I made this simple sock rail to save space. With my normal laundry, socks used two full rails. Now, they use much less space. I saved over 600% of space compared to hanging socks without clothespins.

📏I have two versions for you:
Long version for 8 pairs of socks (231mm)
Short version for 6 pairs (158mm). Good for small printers like Ender 3 or Bambu A1 mini.

I made this model to be flexible and strong. It holds your socks well and is safe for delicate things like tights. It will not damage your clothes.

It uses very little material:
- Long version: about 10g
- Short version: about 7g

3D printing settings

  • Material: Use PLA or a hard material like ABS/ASA.

  • Do not use PETG. It is too flexible and will not hold well.

  • Nozzle: 0.4mm

  • Layer Height: 0.2mm

❗Important for slicing! ❗
There is a small 0.2mm gap between the clips. It works well with Bambu Studio slicer. In Cura (and maybe other slicers), you might see a problem. The slicer will try to fill this gap.
Solution: In Cura, change the "Minimum Wall Line Width" setting to 0.2mm.

cura options


Or, you can use a 0.2mm nozzle. This will work without problems.

Tags