1 / 3
Grinder / Crusher
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Herb Grinder with room for a magnet.
has been working for some time now without any problems!
printed at Layer height 0,15
no supports needed
there is room for a small magnet (5mmx2mm)
(you will need some glue to hold it in place)
In my experience, using a heatgun for a couple seconds on the spikes makes the layers stick together better and therefor the spikes will be stronger and wont break easily.