TANOS Festool Systainer Organiser Boxes - print 20% faster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Boxes insert for Tanos / Festool organiser. I took inspo from matthijsbos, , tweaking for a faster lighter print.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
During the TANOS offer, I bought a lot of Systainer organizers. I loved the matthisjbos design but saw some possible tweaks to be made. With those small tweaks, I gained 20-25% printing time.
Fusion 360 parameters:
On the Fusion files, you can customize everything directly from the parametric tab. The main parameters are the following:
Nozzle_diam: diameter of your nozzle (in mm). Needed to optimize the model for your printer.
Wall_loop: number of loops your nozzle will do for the walls. For 0.4, I recommend 3 loops, and for 0.6/0.8, only 2.
Box_x_num and Box_y_num: size of your box, being multiples of 25mm.
Bottom_layer: thickness of the box floor; I used 3 for a faster print, but I would suggest 4 for a cleaner look.
Stackable_number: allows you to print stackable boxes that fit inside the container while being stacked.
Recommendation:
I would suggest you print with a 0.6mm nozzle.
No raft or anything
Print multiple boxes at once; otherwise you'll be slowed down by minimum layer time
Normally easy to print on a well tuned printer
You'll find like with all mydesigns theFusion 360 files.
For those who want to know, the main differences are:
Redrawn in F360
Replaced fillets with chamfer
Optimized wall and floor thickness to be multiples of the nozzle size. Made the model fully parametric.
12/10/2026 : Update to the Fusion 360 file. Added the possibility to create stackable boxes, removing the chamfer on the plate for bed adhesion.
