Sawtooth Picture Hanger for Canvas Frames - Bildaufhänger Keilrahmen 60mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Glue-on or screw-on sawtooth hanger for stretched canvases without a hanger. Centered notch for perfectly symmetric hang
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Bought a canvas print and it came without any hanger? This little plate fixes that.
It goes on the back of the top stretcher bar of a canvas frame. The two hooks on the sides leave a 40 mm gap in the middle, so the part fits around the vertical center brace that most canvas frames have. The bottom edge has a row of V-notches - just like a classic sawtooth hanger -.so the nail head clicks into a notch and holds the picture in place.
Dimensions
60 × 33 mm, 3 mm plate thickness
7 mm total height including hooks
40 mm gap for center brace
Screw holes: Ø 3.2 mm, countersink Ø 6.2 mm
Print Settings
Material: PETG recommended, PLA also works
Layer height: 0.2 mm
Walls: 3–4
Infill: ≥ 40 %
Supports / Brim: None
Mounting
Center on the back of the top stretcher bar, notches facing down.
Glue or screw into place.
Hang on a wall nail and adjust using the notches.